Title - Prakata Krishna
Size - 24 L x14 W x17 H (cm)
Weight - 6kg
Prakatam Krishna
Prakata Krishna is third sculpture from Vineesh Vijayan's Sree krishna Series. Sculpture portrys the baby Krishna crawling and playing gazing at the viewer.
It took almost Sixtey (60) days to sculpt the masterpiece using polymer clay, building the armature, setting the initial posture and expression of the original sculpture, defining the major features, detailing the attributes and refining it for the final clay model.
To make the wax model of the original sculpture, a silicone rubber mould was made from the original clay model without losing any of the micro detailing and expression of the model to create Prakata Krishna. Hot wax was poured into the hollow mould and allowed through the chasing wax process and resting the same to set.
Next, to assemble the ceramic mould for the Bronze, the wax model underwent the casting process by dipping into a ceramic slurry for building up the ceramic shell and in turn went through “lost wax process” leaving a hard-hollow ceramic shell. The ceramic shell was intensely tested for its durability at various levels and then alone it is passed to the next stage.
Bronze is poured into the hot ceramic shell and allowed to cool and settle. Later, the ceramic mould was chiselled and smashed away. Vineesh’s experienced technical team then had to meticulously work on the final Bronze finish of the Masterpiece with all care and diligence. The product is now ready for patination.
For prolonged patina finish and to enjoy the complete beauty and tranquility of the Masterpiece Sculpture, we advise you to follow the instructions below.
Do’s
- It is advisable to dust it periodically with a soft clean cloth or brush.
- If accidentally any liquid(milk, tea, coffee, etc.) is spilled on the sculpture that may react with the metal surface, immediately use a piece of cloth to wipe as quick as possible and use warm water to clean any residual allowing it to dry soon.
- Use a piece of cloth or gloves while lifting the Sculpture. This prevents the wax coating being tampered and thereby guaranteeing further longevity of the patina finish
- Don’ts
- No abhishekams are encouraged by pouring milk, water, oil, curd, honey, or any other liquids. It will damage the wax coating as the metal will be exposed to acidic contents in the liquids causing oxidation of metal resulting in an undesired colour change of the surface finish.
- Do not touch the bronze sculpture frequently with bare hands,as the thin layer of wax gets wiped off. The sweat from the hands are acidic which will react with the metal surface and changes the patina of the Sculpture.
- This sculpture being an indoor exhibit should not be kept under directsunlight for a long period (more than a week or month).Such long exposure will affect the antique finish of the metal and it may be affected by the ultraviolet rays from the sun.
